South East Asia Iron and Steel Institute
Billet Hot Charging in Natsteel
oleh Jerry Haw Yew Hun
Billet hot charging is a process of charging billets direct from continuous caster to reheating furnace of rolling mill without going through a cooling phase. The concept is to avoid extreme temperatu ...
Selanjutnya
Biomass Charcoal Use for Steel Making with Electric ARC Furnace
oleh Takafumi Hayashi
Palm oil production is a large industry in Malaysia and Indonesia. 16 –17 million tons of palm oil is produced every year in Malaysia and Indonesia each. Its production and the price in both countri ...
Selanjutnya
Bof Off-gas Semi-dry Cleaning System
oleh Morris Liu
Dry systems have been considered as a better solution for BOF gas cleaning because of no need for water treatment and lower energy consumption for 30 years however it is not widely used because of hig ...
Selanjutnya
BOF Primary Off-Gas Semi-Dry Cleaning System
oleh Morris Liu & Emma Pei
BOF Primary Off-Gas Semi-Dry Cleaning System
Selanjutnya
Bracing for the Future, an Application of Steel Braced Frame for Aereas
oleh Sutat Leelataviwat*, Nattapat Wongpakdee**, Anek Siripanichgorn
On May 5th, 2014, a rare earthquake of magnitude 6.3 occurred in the northern part of Thailand causing severe damage to several buildings in the area. The reconstruction of several new school building ...
Selanjutnya
Bypassing Problems Related to Water Cooling: Case Study for Applying ILTEC in a 100-ton EAF
oleh Martina B. Hanel, Andreas Filzwieser, Rolf Degel, Hans-Jörg Krassnig
All different metallurgical furnaces and aggregates that deal with high temperatures have in common, that they need a
powerful cooling system, since temperatures from 800 up to 2000 °C are required ...
Selanjutnya
Capacity Enhancement at Emirates Steel ; Continuous Improvement in EAF Performance with HOT DRI Charge Capacity Enhancement at Emirates Steel ; Continuous Improvement in EAF Performance with HOT DRI Charge Capacity Enhancement at Emirates Steel ; Continuo
oleh D.Patrizio, P.Razza, A.Pesamosca
The performances of the two integrated plants supplied by Danieli in Mussafah Industrial Area – Abu Dhabi already exceeded expectations during first years after start-up (2009 and 2011 respectively) ...
Selanjutnya
Carpet Reinforcement-Full Paper-From NatSteel Singapore
oleh Saravanan Natarajan
Traditionally, to construct a slab with rebar, reinforcement bars are laid one by one manually by steel fixers before concrete is poured. This process consumes considerable amount of time as it involv ...
Selanjutnya
Case Study on the Improvement of Clamping Mechanism for Tungsten Carbide Composite Rolls
oleh DAE-WI, BAE
TaeguTec tungsten carbide composite rolls have been continuously developed and improved to find unique and flexible design for application at various rolling stands and different requirements. The hyd ...
Selanjutnya