South East Asia Iron and Steel Institute
Development of Thermal Spray Technology in China Steel Corporation
oleh Kao Tao-Kang, Ruan Chih-Hao, Lin Cheng-Hui, Hsu Hung-Jen
Thermal spray is a technology that often used to modify the substrate’s surface properties. Different coating materials can be selected in order to contribute desired surface properties, such as hea ...
Selanjutnya
Development of Thick YP460 MPA Class Steel Plates for Large
oleh Masahito Kaneko, Tokutaka Tani
In connection with a recent trend toward large scaled containerships, it becomes more important than ever to ensure hull girder longitudinal strength around the deck openings in order to assure the sa ...
Selanjutnya
Development of Third Cooling System in the Continuous Caster
oleh Shih-Yu Huang, Chun-Hung Wu, Chen-Chou Tsai
A third cooling system of continuous caster was set up in trial by installing a scales-breaking device behind the withdrawal/ straightening section at China Steel Corporation. Not only the peeling of ...
Selanjutnya
Development of Ultra-Clean and Low-Cost Process for Galvanized Steel by Ladle Furnace
oleh Chi-Wei Tai, Chung-Yi Li, Tong-Fa Yeh
The standard process of high quality galvanized steel (GI) was used to be slag modification &
Rheinstahl Heraeus (RH) process in China Steel Corporation (CSC). However, cost and
environment pollut ...
Selanjutnya
Development of Wear Resistant Steel Plate
oleh Himawan Sutanto, Agung Baskoro
In respond to high demand of wear plate, PT Krakatau Steel has successfully developed wear resistant steel. The steel developed is made by using hot strip mill. The steel then be heat-treated through ...
Selanjutnya
Development of Wire Rod Uniform Cooling Technology at Posco
oleh Yumi Kim, Seong Wook Im, Joong Ki Hwang
High-carbon steel is one of the Our leading steel such as Hard wire, Piano wire, Tire cord steel. And due to the increasing demand of these steels, production amount has increased to 70% of wire rod p ...
Selanjutnya
Development of World’s Largest CDQ Plant
oleh Tetsuya Yasuda
Development of World’s Largest CDQ Plant
Selanjutnya
Developments and Application of Novel Water Treatment Techniques in CSC
oleh Wan-Ju Liu, Chu-I Cheng, Mao-Sung Yeh
As a trustworthy steel company of global distinction that pursues growth together with
environmental protection, China Steel Corporation (CSC) has developed and applied the
electrodialysis reversa ...
Selanjutnya
Developments of Manufacutrering Steel Wire Rods Used for High Strength Wires
oleh Tomonobu Ishida
Recently, the Asia countries become important markets of various steel wires used for wire ropes, PC strands and so on. The steel wires are produced through the cold drawing of steel wire rods. Theref ...
Selanjutnya
Developments of Vibration Monitoring and Diagnostic Technologies for NTM of Wire-Rod Mill
oleh Chun-Yung Ko, Chong-Ho Ko
NTM (No-Twist Mill) of No.2 Wire-rod mill in CSC is a pretty high-speed rolling mill
that is capable of operation up to 120 m/s and sustained. This NTM is built to eight roll
stands that equips wi ...
Selanjutnya