South East Asia Iron and Steel Institute
Digitalization in the steel industry
oleh Dr. Markus Reifferscheid
Digitalization in the steel industry
Selanjutnya
Direct Reduced Ironmaking Technology: Hot Briquetting Trials of DRI with Higher Carbon Levels
oleh Vincent Chevrier, PhD., Christopher Ravenscroft
Steelmakers have greatly increased the use of carbon as an energy source in the EAF to reduce electricity
consumption and increase productivity. Ore-based metallics like pig iron and direct reduced ...
Selanjutnya
Diversifying Chemical Compositions of Casing and Tubing Steel According to the Final Applications
oleh Kwang Seop Ro, Adel Al-Butairi
There are many different ways to prepare the future. Diversifying the kinds of steels according to the customers’ needs is one of the best policies for the steel makers. In case of oil and gas field ...
Selanjutnya
ResultsoftheMIDREXThermalReactorS-medium.jpg)
DRI Production using Coke Oven Gas (COG) Results of the MIDREX Thermal Reactor System (TRS) Testing and Future Commercial Application
oleh Gary Metius, Henry Gaines, Michael F. Riley, Lawrence E. Bool III, Bradley Damstedt
In the third quarter of 2014, Midrex Technologies, Inc. and Praxair, Inc., completed the final phase
of development testing on the Thermal Reactor System™ (TRS®) that will produce clean syngas
...
Selanjutnya
Dust Recycling Technology for Electric ARC Furnace using RHF
oleh Jyunpei Kikuta, Toshitaka Nakayama, Hikofumi Taniishi
Last 10 years, Nippon Steel & Sumikin Engineering has built 8 commercial plants of Rotary Hearth Furnace (RHF), and has been developing the RHF technology in order to recycle various wastes from steel ...
Selanjutnya
Dynamic Natural Gas Control Via Architech Solution
oleh Andrea Fontana, Martin Bogusz, Dennis Kenemuth, David Coudert, Geoff Brooks
Increasing the production rate of an Electric Arc Furnace (EAF) while also lowering overall cost can be a difficult challenge. The current situation at OneSteel in Australia is natural gas is less exp ...
Selanjutnya
EAF Dust Treatment for High Metal Recovery
oleh Michio Nakayama
EAF Dust Treatment for High Metal Recovery
Selanjutnya
EAF Heat Recovery Down to 200°c – a New Benchmark
oleh Carsten Born; Ralf Granderath
EAF Heat Recovery Down to 200°c – a New Benchmark
Selanjutnya