South East Asia Iron and Steel Institute
Energy Saving and Process Optimization in a Conventional Hot Strip Mill
oleh Mr. Bilal Akgul, Mr. Hubertus Wenig, Mr. Abdullah Savascioglu
The paper describes the converting to a new generation of descaling nozzles in a
conventional hot strip mill for steel. There are descaling stations behind the reheating
furnace, on the roughing m ...
Selanjutnya
Energy Saving CO2 Absorption Process（ESCAP）
oleh Daisuke Hagiu
ESCAP (Energy Saving CO2 Absorption Process) has been developed as the
most efficient energy cut-off chemical absorption process for carbon dioxide capture.
In order to develop a high performance pro ...
Selanjutnya
Energy Saving Equipment – Recuperator
oleh Moon Kyu Shim & Sang Hee Moon
Energy Saving Equipment – Recuperator
Selanjutnya
Energy Saving Practice and Performance at PT Krakatau POSCO
oleh Dimas Ardiyanta
Limited energy sources, climate change arising from greenhouse gas (GHG)
emissions, and cost competitiveness become the main concern in PT Krakatau Posco. To
optimize energy usage in this Integrat ...
Selanjutnya
Energy Savings from the Coke Oven to the Steel Plant
oleh Peter Juza, Rudolf Hubmer, Dieter Bettinger, Franz Hartl, Peter Schanza
Energy Savings from the Coke Oven to the Steel Plant
Selanjutnya
Energy Savings in the System Pickling/Acid Recovery: The New ECOmode
oleh Frank Baerhold, Stefan Mitterecker, Gerhard Jauk, Arthur Stingl
The recovery of hydrochloric acid from a pickling line via pyrohydrolysis in a spray roast reactor is state of the art. A major
part of the energy consumption of this process results from the evapor ...
Selanjutnya
Energy-Saving Equipment for Blast Furnace Realized by Nippon Steel Engineering’s Technology
oleh Kenta Yamamoto
Energy-Saving Equipment for Blast Furnace Realized by Nippon Steel Engineering’s Technology
Selanjutnya
Enhanced Accuracy of Descaling Nozzle Arrangements with New, Complementary Measurement Methods
oleh JÜRGEN FRICK
Stricter environmental legislations and rising energy costs force metallurgical plant builders and steel producers to constantly increase their energy and resource efficiency. Consequently hydro mecha ...
Selanjutnya
Enhanced Clean Steel Tapping on BOF Vessels with the Interstop Converter Gate Type CG Series
oleh Dr. Andreas Berghöfer, Benno Steiner, Guido Baumgartner
Trends in today’s steel production show increasing demands for highly-sophisticated steel grades. Therefore, the steel industry will eventually be required to install best performing technologies to ...
Selanjutnya
Enhanced Slag Door for Electric Arc Furnace
oleh Riccardo Gottardi, Pierpaolo Rivetti, Stefano Miani, Mauro Milocco, Adam Partyka
Enhanced Slag Door for Electric Arc Furnace
Selanjutnya