South East Asia Iron and Steel Institute
New PW Coke Oven Batteries 2A & 2B for JFE Steel Corporation at Kurashiki Plant
oleh A. Esposito, M. Bisogno, F. Strobino
Introduction
3 Technological Improvements
2 Project Highlights
• Project Constraints
• Project Time Schedule
• Heating and Combustion System
• PW Design Tools – Combustion System
• ...
Selanjutnya
New Rolling Method of Reversing Cold Rolling Mill
oleh Tanehiro Kikkawa
A reversing cold rolling mill has had drawbacks such that unrolled portions necessarily produced in head and tail ends reduce yield, and time consuming works such as removing of coils, threading of th ...
Selanjutnya
New Rolling Stands for Long Product Rolling Mills
oleh M. Tomba, M. Zuccato, A. Fontanini, N. Tomba
PERT has developed and patented a new generation of rolling mill stands for long products, called BiSupport (BS) stands. Being a further development of the traditional housingless and cantilever stand ...
Selanjutnya
New Sizing Stands for Bar & Wire Rod Mills, to Achieve Tighter Tolleranes - The BSS Stands
oleh Nicola Tomba, Matteo Tomba
Thanks to the extremely high stiffness of BSS Sizing Stands, we introduce the concept of “sizing stands” not only in special steel rolling mills (SBQ or alloyed steel), where the tolerance of the ...
Selanjutnya
New Solutions for the New Normal ; Enhancing Competitiveness of Discontinuous Cold Mills & Strip Processing Lines
oleh Ruediger Holz, Mauro Olivotto
Design, build and start-up innovative, state-of-the-art, CAPEX and OPEX optimized Cold processing lines to produce high quality steel, in close partnership with our customers worldwide. This is the pr ...
Selanjutnya
New Specific Steel Grade Production at Bluescope Steel Thailand Plant
oleh Florent Baudu, Maria Germain, Xavier Cluzel
"In ASEAN countries, the steel demand curve shows encouraging trends for specific products despite a gloomy economic
situation. However, today’s market conditions are ever-changing and the highest ...
Selanjutnya
New Technologies and Approaches to Improve Efficiency for Reheating Furnaces & Processing Lines
oleh Michel Boyer, Ludovic Ferrand
In today’s competitive steel market, the improvement of existing production equipment such as reheating furnaces or processing lines increases profitability thanks to higher
quality, higher produc ...
Selanjutnya
New Technology to Meet Challenges of High Quality Rebars – Danieli – QTB PUSTM
oleh Ananya Mukhopadhyay, Luigi M Galasso, Massimo Ena, Giuseppe Buzzi
East and South-East Asia together produce 62 percent of world’s rebar and consume nearly all. Much of the economic progress in this region is driven by large scale infrastructural development and co ...
Selanjutnya
New Testing Technology of Metallic Materials
oleh Jia Yunhai, Yang Zhigang
As the development of materials, it has been realized that some gaseous elements and rare earth elements play very important role in the metallic materials, and the microstructure significantly affect ...
Selanjutnya
Niobium Microalloying in the Automotive Steels for Light-Weighting
oleh Dr. Bian Jian
Over the last decades lightweight has become the most important strategy in the car body manufacturing and it can be achieved most economically by using high strength steels in the aspects of material ...
Selanjutnya