South East Asia Iron and Steel Institute
The Application and Characteristics of Low Carbon Martensitic Stainless Steels on Turbine Blade
oleh Hwa-Teng Lee, Shih-Feng Chang, Wun-Sin Hou, Shang-Chih Wang, Chung-Chun Tsai, Yu-Lei Liu, Wei-Cheng Kuo, Yuan-Tyng Sheu, Tzuu-Yaw Lee
410M1 and 410M2 martensitic stainless steels are modified from the basic martensitc stainless steel 410, contain some niobium and applied for power generation blade. We study the distinction of the he ...
Selanjutnya
The Application of Electro Galvanized Steel Sheet with Functional Passivation Treatment on Motorcycle Tank
oleh Jui-Chi Wu, Ching-Kuo Kuo, Hsing-Lien Wu
Typically motorcycle fuel tanks were made of single-side zinc-nickel alloy coated steel. However, because of its high cost, some of more economical alternative materials were developed, among them was ...
Selanjutnya
The Application of Hot Stamped Boron Steel 15B22 on the Automotive Parts
oleh Cheng-Kai Chiuhuang, Shi-Wei Wang & Ping-Kun Lee, Tsung-Rong Chen
Due to the demand of lightweight and safety requirements, the application of hot_x0002_stamping parts on the automotive body structure keeps increasing. China Steel Corporation has successfully develo ...
Selanjutnya
The Application of Industrial Waste Incinerator at China Steel
oleh Kuan-Nan Lin
The Application of Industrial Waste Incinerator at China Steel
Selanjutnya
The Application of Lubricant Film Coated GA Steel
oleh Ming-Hao Liu, Heng-Shou Chang, Hsing-Lien Wu, Hung-Ping Wang
Galvannealed steel (GA) has both good corrosion resistance and weldability and thus
has become the mainstream steel material used in auto industry. However, the high
surface friction of the GA pro ...
Selanjutnya
The Application of the Coreless Induction Furnace in Steel Melting
oleh Graham Cooper
The Application of the Coreless Induction Furnace in Steel Melting
Selanjutnya
The Characteristics of Strain Induced Transformation in Medium Carbon Steels
oleh "C. Chien, Y. T. Wang, C. Y. Huang"
"In this study, the strain effects on the phase transformation and hardness of medium carbon
steels (S50C) was investigated by using computer-aided steel simulation and the dilatometer.
It has bee ...
Selanjutnya
The Critical Role of Water Treatment and Water Quality Management in the Steelmaking Processes
oleh Peter Jenner, Ravindra
Steelmakers throughout the world continue to look for ways to lower their Total Cost of Operations (TCO) and improve their economic position in the face of difficult times. The importance of water qua ...
Selanjutnya
The Decrease of Waste Oil Viscosity to Save Steam Usage in Cold Rolling Waste Water Treatment Plant of CSC
oleh Ying-Chieh Liu, Mao-Sung Yeh, Shen-Szu Wang
The No.2 cold rolling mill waste water treatment plant is to treat the TCM/PLCM oily waste water. Because oily waste water contains high concentration of silica, iron, and grease, it leads to saponifi ...
Selanjutnya
The Development of 540 MPa Class High Strength Low Alloys Steel for Bridge Structural Application Paper
oleh Agung Baskoro, Himawan Sutanto
Indonesia is an archipelago country which needs bridges to connect each island. For the future, Indonesia has planned to build some bridges and others infrastructure. Therefore the demand of steel esp ...
Selanjutnya