South East Asia Iron and Steel Institute
Pre-Engineer Building System - A Solution to Speed Quality and Value of Steel Buildings
oleh Gan Hong Teng
Pre-Engineer Building System - A Solution to Speed Quality and Value of Steel Buildings
Selanjutnya
Sila login untuk meminjam buku.
PRE-Reduced Iron Produced from Low Grade ORE using Biomass
oleh Hadi Purwanto, Nur Fazilah Mohd Selamat, Pramusanto And Tomohiro Akiyama
The treatment of ore containing iron oxide hydrate has been proposed in order to utilize low grade iron ore in the iron steel industry due to shortage of high grade ore deposit soon in the near future ...
Selanjutnya
Sila login untuk meminjam buku.
Preliminary Studies on the Bioremediation of Steel Sludge by Effective Microorganisms
oleh Teoh Kheng Swee, Kong Ern Hun
Preliminary Studies on the Bioremediation of Steel Sludge by Effective Microorganisms
Selanjutnya
Sila login untuk meminjam buku.
Preparation of Electric ARC Furnace Steel Slag as Hazardous Waste Using the Slag Atomizing Technology in Pt Krakatau Steel - Indonesia
oleh Eka Syuhada
EAF slag is by product arising in a huge volume in steel making (15 – 20% of melt capacity). Depending on the steel making process and slag tretment, it contains metal residues. Treatment of these s ...
Selanjutnya
Sila login untuk meminjam buku.
Presice Measurement of Hot and Cold Slabs in the Different Manufacturing and Handling Stages of Slabs
oleh Thomas Jansson
The basis of the paper is to describe measuring systems used to measure slabs in various stages of the slab manufacturing and slab handling process. In the last few years there has been an in increasi ...
Selanjutnya
Sila login untuk meminjam buku.
Primus® A Mature Technology Inducing New Developments
oleh Patrick C. Guillaume, René Stoltz, Francis Michaud, Jean-Luc Roth
The PRIMUS® technology was developed in the late 1990’s by Paul Wurth. Originally the technology was intended to treat iron ore to produce direct reduced iron (DRI). Eventually, the PRIMUS® techno ...
Selanjutnya
Sila login untuk meminjam buku.
Process Improvement Through Physical Modeling of Bottom Gas Stirring in Metallurgical Ladles
oleh A. M. Amaro-Villeda, M. A. Ramirez-Argaez, A.N. Conejo
The effect of slag properties (thickness and viscosity), have been evaluated in terms of mixing time, exposed surface or ladle eye and energy dissipation. A nozzle configuration defined in terms of th ...
Selanjutnya
Sila login untuk meminjam buku.
Process Improvements for Prevention Stain Defect (B49) on Hot Rolled Pickled & Oiled (HRPO) Product
oleh Eddy Rukman, Iwan Muliawan
Hot Rolled Pickled & Oiled (HRPO) is one of the high value added products of PT Krakatau Steel. In the last few years stain defect (B49) is always found on the surface of HRPO and this defect was rank ...
Selanjutnya
Sila login untuk meminjam buku.