South East Asia Iron and Steel Institute - eLib eBook Portal

Kategori

Kategori

Sedia Untuk Dipinjam Akademik Am Kejuruteraan & IT Novel Am

Kategori

Sedia Untuk Dipinjam Akademik Am Kejuruteraan & IT Novel Am

Kategori : Novel Am

daripada 73 laman

Deformed Bar-in-Coil in Natsteel

oleh Chung Yuan Mei

Deformed Bar-In-Coil (DBIC) is used in the reinforcement of concrete. In NatSteel Holdings, DBIC can be produced through 3 methods: hot rolling, stretching or cold rolling. In the hot rolling process, ...

Sila login untuk meminjam buku.

Design of Wide Plate Mill Finishing Facilities

oleh -

-

Sila login untuk meminjam buku.

Desulfurization of Pig Iron with Lance or Through Kanbara Refining a Survey

oleh Dr. Patrick Tassot, H. Namba, J. Wang

The operation desulfurization, and sometimes dephosphorization, of pig iron can be conducted in torpedo car or transfer ladles. Main industrial methods for these operations are the deep injection of t ...

Sila login untuk meminjam buku.

Desulphurization of Molten Steel in RH-Degasser by Powder Blowing to Produce Non Grain Oriented (NGO) Silicon Steel

oleh Zulfiadi Zulhan, Christian Schrade, Yelsi Ade Patriona

Steel desulphurization of molten steel during RH treatment by addition of Ca-based fluxes through powder injection lance as well as through alloying vacuum hopper system were investigated by reasearch ...

Sila login untuk meminjam buku.

Detection and Prevention of Air Leakage from Sinter Plant EP

oleh J.S. Shiau and S.H. Liu

Detection and Prevention of Air Leakage from Sinter Plant EP

Sila login untuk meminjam buku.

Development and Current Status of the Corex and Finex Process

oleh C. Bohm, D. Siuka, J. Schenk, J. Kriechmair, C.O. Kang, H.G. Lee, S. Joo

With the contract award for a COREX C-3000 plant with an annual capacity of 1.5 million t hot metal by Baosteel Pudong ISCO, PR China, a new milestone for the COREX technology could be reached. This m ...

Sila login untuk meminjam buku.

Development for the Increase of Casting Sequences at Wakayama No.3 Slab Caster

oleh Manabu Adachi, Hiroshi Hayashi, Atsushi Hirata, Nobuhiro Okada, Masayuki Kawamoto

The low carbon steel slabs, which are supplied to other companies in large lot size, have been cast at the No.3 slab caster in Wakayama Steel Works since 2002. In order to increase the productivity of ...

Sila login untuk meminjam buku.

Development of 780MPA Grade Galvannealed Dual Phase Steels for Automotive Structural Parts

oleh K.C.Yang, H.C. Cheng

Recently, light-weight and energy-saving requirements for the automobile industry are extremely important in order to protect the environment by a reduction of the emission of CO2. One of this ways to ...

Sila login untuk meminjam buku.

daripada 73 laman