South East Asia Iron and Steel Institute

Category : General Novel

First

Last

of 73 pages

Pre-Engineer Building System - A Solution to Speed Quality and Value of Steel Buildings

by Gan Hong Teng

Pre-Engineer Building System - A Solution to Speed Quality and Value of Steel Buildings

Please login to borrow the book.

PRE-Reduced Iron Produced from Low Grade ORE using Biomass

by Hadi Purwanto, Nur Fazilah Mohd Selamat, Pramusanto And Tomohiro Akiyama

The treatment of ore containing iron oxide hydrate has been proposed in order to utilize low grade iron ore in the iron steel industry due to shortage of high grade ore deposit soon in the near future ...

Please login to borrow the book.

Preliminary Studies on the Bioremediation of Steel Sludge by Effective Microorganisms

by Teoh Kheng Swee, Kong Ern Hun

Preliminary Studies on the Bioremediation of Steel Sludge by Effective Microorganisms

Please login to borrow the book.

Preparation of Electric ARC Furnace Steel Slag as Hazardous Waste Using the Slag Atomizing Technology in Pt Krakatau Steel - Indonesia

by Eka Syuhada

EAF slag is by product arising in a huge volume in steel making (15 – 20% of melt capacity). Depending on the steel making process and slag tretment, it contains metal residues. Treatment of these s ...

Please login to borrow the book.

Presice Measurement of Hot and Cold Slabs in the Different Manufacturing and Handling Stages of Slabs

by Thomas Jansson

The basis of the paper is to describe measuring systems used to measure slabs in various stages of the slab manufacturing and slab handling process. In the last few years there has been an in increasi ...

Please login to borrow the book.

Primus® A Mature Technology Inducing New Developments

by Patrick C. Guillaume, René Stoltz, Francis Michaud, Jean-Luc Roth

The PRIMUS® technology was developed in the late 1990’s by Paul Wurth. Originally the technology was intended to treat iron ore to produce direct reduced iron (DRI). Eventually, the PRIMUS® techno ...

Please login to borrow the book.

Process Improvement Through Physical Modeling of Bottom Gas Stirring in Metallurgical Ladles

by A. M. Amaro-Villeda, M. A. Ramirez-Argaez, A.N. Conejo

The effect of slag properties (thickness and viscosity), have been evaluated in terms of mixing time, exposed surface or ladle eye and energy dissipation. A nozzle configuration defined in terms of th ...

Please login to borrow the book.

Process Improvements for Prevention Stain Defect (B49) on Hot Rolled Pickled & Oiled (HRPO) Product

by Eddy Rukman, Iwan Muliawan

Hot Rolled Pickled & Oiled (HRPO) is one of the high value added products of PT Krakatau Steel. In the last few years stain defect (B49) is always found on the surface of HRPO and this defect was rank ...

Please login to borrow the book.

First

Last

of 73 pages