South East Asia Iron and Steel Institute
Bracing for the Future, an Application of Steel Braced Frame for Aereas
oleh Sutat Leelataviwat*, Nattapat Wongpakdee**, Anek Siripanichgorn
On May 5th, 2014, a rare earthquake of magnitude 6.3 occurred in the northern part of Thailand causing severe damage to several buildings in the area. The reconstruction of several new school building ...
Selanjutnya
Sila login untuk meminjam buku.
Bypassing Problems Related to Water Cooling: Case Study for Applying ILTEC in a 100-ton EAF
oleh Martina B. Hanel, Andreas Filzwieser, Rolf Degel, Hans-Jörg Krassnig
All different metallurgical furnaces and aggregates that deal with high temperatures have in common, that they need a
powerful cooling system, since temperatures from 800 up to 2000 °C are required ...
Selanjutnya
Sila login untuk meminjam buku.
Capacity Enhancement at Emirates Steel ; Continuous Improvement in EAF Performance with HOT DRI Charge Capacity Enhancement at Emirates Steel ; Continuous Improvement in EAF Performance with HOT DRI Charge Capacity Enhancement at Emirates Steel ; Continuo
oleh D.Patrizio, P.Razza, A.Pesamosca
The performances of the two integrated plants supplied by Danieli in Mussafah Industrial Area – Abu Dhabi already exceeded expectations during first years after start-up (2009 and 2011 respectively) ...
Selanjutnya
Sila login untuk meminjam buku.
Carpet Reinforcement-Full Paper-From NatSteel Singapore
oleh Saravanan Natarajan
Traditionally, to construct a slab with rebar, reinforcement bars are laid one by one manually by steel fixers before concrete is poured. This process consumes considerable amount of time as it involv ...
Selanjutnya
Sila login untuk meminjam buku.
Case Study on the Improvement of Clamping Mechanism for Tungsten Carbide Composite Rolls
oleh DAE-WI, BAE
TaeguTec tungsten carbide composite rolls have been continuously developed and improved to find unique and flexible design for application at various rolling stands and different requirements. The hyd ...
Selanjutnya
Sila login untuk meminjam buku.
CCM Revamped for BT Quality Improvement
oleh Chien-Chung, Chang
The yearly production of No.2 Steel making plant in Feng-Hsin is about 800,000 tons of good billets, 200,000 tons (25%) of which for commercial (re-bar, structure steel) use, and 600,000 tons (75%) of ...
Selanjutnya
Sila login untuk meminjam buku.
Challenging Repair Solutions for the BOF
oleh Dr. Patrick Tassot, Christian Turrel
Since 60% of the steel production is produced in integrated steel shops using the Basic Oxygen Furnace (BOF) it is essential to optimize the productivity of the devices. Major factor affecting the pro ...
Selanjutnya
Sila login untuk meminjam buku.
Chances and Risks of Revamping Cold Rolling Mills
oleh Gundolf Schneider
Revamping of existing cold rolling mills for steel and non-ferrous metal strips is an important device for increasing the productivity and quality of the finished rolled strips as well as expanding th ...
Selanjutnya
Sila login untuk meminjam buku.